新闻发布 News
·文章中心 首页>>新闻发布>>文章中心
系统操作前后,要注意安全使用正确保管保管
>>返回<<
发布日期:[2013-6-12]
        鲁能奥特(http://www.lnat.com.cn/)认为:在当前现实的狭隘基础上,有高尚理想,全面的计划;在一步一步行动上,想到远大前途,脚踏实地地稳步前进,才能有所成就。
         Luneng otter (http://www.lnat.com.cn/) think: in the current reality of the narrow basis, a noble ideal, comprehensive plan; in a step by step action, think of a big future, stand on solid ground to steer, can be achieved.
        微机五防解锁钥匙管理系统由解锁钥匙管理主机、智能解锁钥匙、万能解锁钥匙和五防锁具组成.以解锁钥匙管理主机及智能解锁钥匙为核心设备。解锁钥匙管理主机是系统主控单元,负责通信(GSM短信、网络、RFID)、图形模拟、对位、传送、回传智能解锁钥匙操作信息、万能解锁钥匙窗门管理等工作。智能解锁钥匙是微机五防解锁钥匙管理系统的执行部件,智能解锁钥匙可接收解锁钥匙管理主机下发的解锁票,并提示操作人员逐一对设备上的锁具进行解锁操作。操作结束后.将所有操作信息回传给解锁钥匙管理主机。
         Microcomputer five prevention unlocking key management system by the unlocking key management host, intelligent unlocking key, universal unlocking key and five lock. To unlock the keys management host computer and intelligent unlocking keys equipment. The unlocking key management host is the system main control unit, responsible for communication (GSM short message, network, RFID), graphic simulation, registration, transfer, return of intelligent unlocking key operation information, universal key to unlock doors and windows management etc.. Intelligent unlocking key is the executive component of microcomputer five prevention unlocking key management system, intelligent unlocking key can unlock ticket to receive the unlocking key management host, and prompt operation staff one by one to unlock operation of lock equipment. After the end of operation. All the operating information back to the unlocking key management host.
        系统将变电站的电气一次系统接线图固化在防误主机软件中.运行人员在五防主机上指定解锁设备,然后由就地确认人确认,通过就地IC卡或密码、GSM短信或者网络发送给高层管理员授权,授权人授权成功后,再由就地监护人监护后.系统才允许运行人员将解锁操作序列传送给智能解锁钥匙,成功接收解锁操作票后,才能使用智能解锁钥匙为现场设备解锁,解锁完成后将智能解锁钥匙放人防误主机的传送座中.读取解锁信息,解锁钥匙管理主机将保存所有的解锁信息。
        The system will be an electrical system wiring diagram in curing substation anti-misoperation host software. The operating personnel in the five - to unlock the device on the specified host, followed by in situ validation confirmed, through local IC card or password, GSM messages sent to senior administrator or network authorization, authorized person authorized after the success, by the local Guardian after the system was allowed to run. The staff will unlock operation sequence is transmitted to the intelligent key to unlock, unlock success receiving operation ticket, to use the intelligent unlocking key for field device unlock, unlock will complete the transfer block intelligent unlocking key put air error host. Read unlock information, the unlocking key management host will save the unlock information of all the.
        在现场解锁过程中,如果发现智能解锁钥匙显示锁码正确.但打不开锁.除了锁具本身的机械部分卡涩无法开锁以外.大部分是由于智能解锁钥匙维护和使用不当造成的。比如智能解锁钥匙充电不足:智能解锁钥匙受到强烈震动或冲击解锁电极变形;解锁电路损坏等。运行人员在日常维护和使用时,一定要按厂家的要求正确保管好智能解锁钥匙。
         In the unlocking process, if found intelligent unlocking key display the lock code is correct. But could not do so. In addition to the mechanical parts of the lock itself stuck to unlock. Mostly because of intelligent unlocking key maintenance and improper use of. For example, intelligent unlocking key under charge: intelligent unlocking key to unlock the strong deformation of electrode vibration or shock; unlock circuit damage etc.. The operating personnel in the daily maintenance and use, must be correct to keep intelligent unlocking key according to the requirements of manufacturers.
        台阶是一层一层筑起的,目前的现实是未来理想的基础。
         The step is a layer built, the reality is the basis for future ideal.
打印此页】 【顶部】【关闭